NWRCOMMERCIAL(720) 674-0204Request an evaluation ↗

AURORA / EPDM REPAIR / FIELD CASE STUDY

Aurora EPDM repair at a leaking entryway.

A failed membrane lap. An entryway leak. A targeted EPDM patch at the seam and transition wall.

Location: Aurora, Colorado

Roof system: Ballasted EPDM

Reported issue: Major leak over the entryway

Work performed: EPDM patch at the failed seam and transition wall

A major entryway leak on a ballasted EPDM roof.

NWR Commercial investigated a major leak over the entryway at an Aurora property with a ballasted EPDM roof. Our team located a seam lap failure and applied an EPDM patch to the affected seam and transition wall. These field photographs document the conditions investigated and the patched area.

Finding the failed seam lap.

The investigation identified a failure where overlapping EPDM membrane sheets should remain bonded. The photographs show a lifted membrane lap and close inspection near the roof transition. The wider view places that detail beside the metal edge and adjacent shingle roof above the entryway.

The ballasted EPDM roof is shown here at the exposed repair area, with close-up views of the membrane laps and transition details.

Repairing the seam and transition wall.

Our team applied an EPDM patch at the failed seam and transition wall. The work focused on the identified failure at the entryway. The final photograph shows the patched seam and wall-transition area.

Field photos: investigation and patched area.

Select a photograph to view the full image.

Entryway roof transition before repair, with EPDM membrane, edge metal and adjacent shingle roof visible.
Entryway roof transition before repair, with EPDM membrane, edge metal and adjacent shingle roof visible.
A lifted EPDM membrane lap exposed during the entryway leak investigation.
A lifted EPDM membrane lap exposed during the entryway leak investigation.
Close inspection of the EPDM seam near the roof transition and metal edge.
Close inspection of the EPDM seam near the roof transition and metal edge.
Patched EPDM seam and wall-transition area following the targeted repair.
Patched EPDM seam and wall-transition area following the targeted repair.

Confirmed outcome: entryway leak resolved.

The entryway leak was confirmed resolved after the EPDM seam and transition-wall repair.

What this project illustrates.

An entryway leak can require attention to the connection between the roof field, membrane laps and adjoining wall or edge details. The visible surface is one part of the roof assembly. For this Aurora project, the reported work addressed the seam lap failure and transition wall rather than replacing the whole roof.

For another building, the appropriate scope depends on its own conditions. A localized repair should not be taken as proof that every ballasted EPDM roof can be repaired the same way. The existing membrane, adjoining details and any underlying moisture concerns need to be evaluated for that property.

Discuss an EPDM leak at your property.

NWR Commercial serves commercial and multi-family properties in Aurora and across the Front Range. Share the property location, where water appears inside and any available roof history. We can discuss the evaluation and repair scope appropriate to your building.

Commercial roof repair and leak evaluation · TPO, EPDM and PVC roofing systems · Front Range service area

Request a roof evaluation or call (720) 674-0204.

Request evaluation ↗Call NWR